en:android:start
Medien-Manager
Namensräume
Namensraum wählen
Dateiauswahl
Dateien in bpi-r2
- 4.14-dualgmac.patch
- 2023/06/08 17:06
- 33.3 KB
- 4.14-mmc.patch
- 2023/06/08 17:06
- 7.5 KB
- boot-structure.png
- 1713×411
- 2023/06/08 17:06
- 35.1 KB
- bpi-r2_gpio.png
- 1436×393
- 2023/06/08 17:06
- 276.4 KB
- bpi-r2-emmc-boot0-ddr1600-20190722-0k.img.gz
- 2023/06/08 17:06
- 56 KB
- bpi-r2-head1-512b.img
- 2023/06/08 17:06
- 1.5 KB
- bpi-r2-head440-0k.img
- 2023/06/08 17:06
- 440 B
- bpi-r2-preloader-ddr1600-20190722-2k.img.gz
- 2023/06/08 17:06
- 56 KB
- bpi-r2-sd-boot1m.img.gz
- 2023/06/08 17:06
- 158.5 KB
- bpi-r2-sd-boot2k.img.gz
- 2023/06/08 17:06
- 143 B
- bpi-r2-serial-putty-reg.zip
- 2023/06/08 17:06
- 2.7 KB
- bpir2_uart.jpg
- 600×847
- 2023/06/08 17:06
- 165.1 KB
- build.sh
- 2023/06/08 17:06
- 1.5 KB
- button_led_schaltplan.png
- 402×360
- 2023/06/08 17:06
- 21.8 KB
- button_led_steckplatine.png
- 951×636
- 2023/06/08 17:06
- 81.9 KB
- button_led.fzz
- 2023/06/08 17:06
- 5.1 KB
- cp210x_universal_windows_driver.zip
- 2023/06/08 17:06
- 807.2 KB
- gpio_farbig.png
- 150×601
- 2023/06/08 17:06
- 33.8 KB
- gpio_farbig.svg
- 2023/06/08 17:06
- 45.9 KB
- gpio_high_low.png
- 800×500
- 2023/06/08 17:06
- 49.9 KB
- gpioreg.tar.gz
- 2023/06/08 17:06
- 3.5 KB
- hostapd_ap0.conf
- 2023/06/08 17:06
- 543 B
- hostapd_wlan1.conf
- 2023/06/08 17:06
- 538 B
- hostapd.conf
- 2023/06/08 17:06
- 359 B
- img_20170915_121142_dsc_1002_.jpg
- 3372×2409
- 2023/06/08 17:06
- 3.5 MB
- img_20180313_heatsink.jpg
- 1024×641
- 2023/06/08 17:06
- 232 KB
- img_20180313_wallmontage.jpg
- 1024×512
- 2023/06/08 17:06
- 124.7 KB
- install_kernel.zip
- 2023/06/08 17:06
- 690 B
- interfaces.conf
- 2023/06/08 17:06
- 447 B
- led.svg.png
- 256×580
- 2023/06/08 17:06
- 12.5 KB
- mmc_pcie.patch
- 2023/06/08 17:06
- 12 KB
- mmc-swap.diff
- 2023/06/08 17:06
- 2.4 KB
- mt76_4.14.tar.gz
- 2023/06/08 17:06
- 3.3 MB
- mt7623n_evb_bpi_defconfig.txt
- 2023/06/08 17:06
- 132.7 KB
- mt7623n_evb_fwu_defconfig.txt
- 2023/06/08 17:06
- 4.9 KB
- mt7623n_evb_ryderlee_defconfig.txt
- 2023/06/08 17:06
- 4.9 KB
- mt7623n-bananapi-bpi-r2_onewire.zip
- 2023/06/08 17:06
- 3.7 KB
- mt7623n-bananapi-bpi-r2_pps.zip
- 2023/06/08 17:06
- 3.7 KB
- parttable.dat
- 2023/06/08 17:06
- 249 B
- pcie.patch
- 2023/06/08 17:06
- 4.3 KB
- putty-serial.png
- 604×545
- 2023/06/08 17:06
- 13.9 KB
- r2_wifi_helper.zip
- 2023/06/08 17:06
- 20.7 KB
- r2-firmware.zip
- 2023/06/08 17:06
- 297.8 KB
- rootfs_ttys0_rng.cpio.gz
- 2023/06/08 17:06
- 4.9 MB
- sata_power.jpg
- 341×671
- 2023/06/08 17:06
- 61 KB
- u-boot_default.bin.gz
- 2023/06/08 17:06
- 101.2 KB
- uart-arduino.jpg
- 640×1104
- 2023/06/08 17:06
- 251.2 KB
- uart-bpi.jpg
- 1024×732
- 2023/06/08 17:06
- 261.8 KB
- uart-levelshifter.jpg
- 1024×1453
- 2023/06/08 17:06
- 432.2 KB
- uarttest.ino
- 2023/06/08 17:06
- 1.5 KB
- wifi_enable.sh
- 2023/06/08 17:06
- 442 B
- wifi_enable.sh.txt
- 2023/06/08 17:06
- 442 B
- wifi-connector.jpg
- 1024×873
- 2023/06/08 17:06
- 262.5 KB
- wifi.sh
- 2023/06/08 17:06
- 1.4 KB
- wmt_soc.cfg
- 2023/06/08 17:06
- 95 B
Datei
- Anzeigen
- Verlauf