Differences

This shows you the differences between two versions of the page.

--- en:bpi-r3:lte [2022/10/03 14:41] – [first Test] frank
+++ en:bpi-r3:lte [2022/11/13 16:15] – frank
@@ Line 21: / Line 21: @@
 APN-settings: https://forum.congstar.de/thread/46325-mobil-surfen-mit-congstar-manuelle-einstellungen-zum-mobilen-internet-apn/
+Some information of different interface modes and which modules are required on Openwrt:
+https://forum.banana-pi.org/t/bpi-r3-information/12897/83?u=frank-w
 ===== QMI-Mode =====
@@ Line 91: / Line 94: @@
 https://gist.github.com/Juul/e42c5b6ec71ce11923526b36d3f1cb2c#connecting-using-mbim
+<code>
+qmicli -d /dev/cdc-wdm0 --dms-set-fcc-authentication --device-open-mbim
+mbimcli --device=/dev/cdc-wdm0 -p --enter-pin=$PIN1
+mbim-network /dev/cdc-wdm0 start
+mbimcli -d /dev/cdc-wdm0 -p --query-ip-configuration
+root@bpi-r3:~# ip addr add 10.22.186.x/30 dev wwan0
+root@bpi-r3:~# ip link set wwan0 up
+root@bpi-r3:~# ip route add default via 10.22.186.y
+root@bpi-r3:~# ping 8.8.8.8
+mbim-network /dev/cdc-wdm0 stop
+</code>
 ==== first Test ====