Differences

This shows you the differences between two versions of the page.

--- en:bpi-r2pro:start [2023/04/17 20:52] – [Uboot] frank
+++ en:bpi-r2pro:start [2024/02/17 13:49] – frank
@@ Line 101: / Line 101: @@
 So i'm adding fit booting and builtin env like for r64 and r3 for 2023.07+
+  BPI-R2PRO> ls $device $partition
+  BPI-R2PRO> setenv fit bpi-r2pro-netnext.itb
+  BPI-R2PRO> run buildargs
+  BPI-R2PRO> fatload $device $partition $loadaddr $fit
+  10845897 bytes read in 937 ms (11 MiB/s)
+  BPI-R2PRO> bootm $loadaddr
+R2pro will be supprted as own board in uboot 2024.01.
+Pcie is usable too,but needs manual enabling regulators
+https://www.mail-archive.com/u-boot@lists.denx.de/msg488399.html
+=== tftp ===
+  run buildargs
+  tftp $loadaddr 192.168.0.10:6.6-main-bpi-r2pro.itb
+  bootm $loadaddr
 ==== barebox ====
 alternative to uboot as bootloader, supports ethernet/tftp-boot (wan-port only due to missing switch driver)
@@ Line 139: / Line 159: @@
 Started my own work here: https://github.com/frank-w/BPI-R2-4.14/tree/5.16-next2
+=== thermal ===
+  root@bpi-r2pro:~# cat /sys/class/thermal/thermal_zone0/temp
+
+  root@bpi-r2pro:~# cat /sys/class/thermal/thermal_zone1/temp
+
 === Network ===
@@ Line 179: / Line 206: @@
   # mount -t debugfs none /sys/kernel/debug/
   # cat /sys/kernel/debug/gpio
-  # cat /sys/kernel/debug/pinctrl
+  # cat /sys/kernel/debug/pinctrl/pinctrl-handles
   # cat /sys/kernel/debug/regulator/regulator_summary
+  # cat /sys/kernel/debug/clk/clk_summary
 === other ===