• Hardware
  • Debug-UART
  • power-on (10 second button-press)
  • additional Hardware:
    • Power Supply: 12V/2A recommended, Powerplug 5.5 mm/2.1 mm Reichelt
    • microSD-Card (>=8GB): Sandisk 32GB Ultra
    • WLAN-antennas: 5dbi with rp-SMA To IPEX/u-FL cable
    • PCIe Wlan-Card: Forum ⇒ MT76
  • emmc: Forum
• Software
  • OS-Images:
    • official: GoogleDrive dev.banana-pi.org.cn
    • my own (Debian/Ubuntu): GoogleDrive
    • Debian | Ubuntu
    • LEDE / OpenWRT
    • Ubuntu forum
    • CentOS Forum
  • Kernel/Uboot (debian):
    • 4.4.70 on official GitHub
    • 4.14+ on my GitHub
    • official 4.14
    • precompiled Kernel on my GDrive
  • Networkconfiguration
  • GPIO
  • WLAN / Bluetooth
  • HW-NAT 4.9/4.14 / NF-Tables 5.12+
  • VLAN-Support
  • CryptoDev
  • HDMI
  • IR
  • irq handling
• help / documentation:
  • GitBook: BPI-R2 GitBook
  • Schematics: GoogleDrive
  • Datasheet: v1.0 v1.1 (GoogleDrive)
  • Forum EN
• links

• on-board-WLAN (AP-Mode working so far),4.14 + 4.19 + 5.x
• bluetooth working (beta) in 4.14 + 4.19 (except btle)
• BPi-R2 does not power-off: GitHub (working in 4.14+4.19+5.x)
• Switch 7530 Port-separation/vlan in 4.4.x not supported, in 4.14+ vlan+separation works
• 2nd GMAC works on 4.14+4.19, in 5.x this is only available on phylink-branches,5.10-gmac has dsa patches for second gmac,above gmac2 can be used with vlan aware bridge

Export namespace "en:bpi-r2:" to file BananaPi-R2_EN_FW-WEB-Wiki.pdf